MakerWorld
Hueforge & Lithophane
Voir le modèle
Marvel Style Venom Bookmark
61
Téléchargements
49
Likes
34
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 190x60mm in sizeYou may print at higher layer heights below the Min Depth of 1.3mmThe Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 PLA BambuLab Matte Scarlet Red Transmission Distance: 2This print uses 3 unique filaments Swap Instructions: Start with Charcoal At layer #18 (1.52mm) swap to Ivory White At layer #25 (2.08mm) swap to Scarlet Red for the rest. Boost MeBoost me up if you want to see more! :) Thanks!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
