Marvel Thor - HueForge

Marvel - Thor HueForge   If you use the STL, please note the settings. Otherwise, load profile.   Setting: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA JAYO White Transmission Distance: 6 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Gray At layer #16 (1.36mm) swap to Beige At layer #19 (1.6mm) swap to White for the rest.