Mask Case FFP2

FFP2 Mask-Case

This is a simple Mask-Case for a typical FFP2 Mask. Never loose your mask again or stop
it from getting wrinkled in your pocket.

If you like this Design please consider giving it a like.
If you want to support me you can give me a tip on my paypal.me account.

----------------------------
My 3D-Print settings:
----------------------------

Filament Type: PLA

Slicer: Cura Ultimaker

Size: 163.9 x 21.1 x 101.5 mm

Layer Height: 0.14mm
Line Width: 0.4mm
Wall Thickness: 0.8mm
Infill Density: 30%

Print Speed: 55mm/s
Initial Layer Speed: 10mm/s

Brim width: 3mm

You may need a support structure for the hook.

With this settings:
32 grams (10.82m) Filament is needed.
It takes about 7 hours to print.
It costs about 0.81€. (25€/kg)