MakerWorld
Hueforge & Lithophane
Voir le modèle
Master Chief Hueforge
17
Téléchargements
32
Likes
7
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA+ Esun Black Transmission Distance: 0.3 PLA+ Esun Dark Blue Transmission Distance: 2 PLA+ Esun Pine Green Transmission Distance: 1.2 PLA+ Esun White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Blue At layer #13 (1.12mm) swap to Pine Green At layer #20 (1.68mm) swap to White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
