Master Chief Hueforge

Project: master chief.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Paramount 3D British Racing Green Transmission Distance: 3 PLA Overture Green Transmission Distance: 1.1 PLA Elegoo Red Transmission Distance: 4.2 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to British Racing Green At layer #15 (1.28mm) swap to Green At layer #16 (1.36mm) swap to Red At layer #17 (1.44mm) swap to Sunrise Orange At layer #18 (1.52mm) swap to Savannah Yellow At layer #19 (1.6mm) swap to White for the rest.