Master Roshi

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Matte Dark Brown Transmission Distance: 2PLA BambuLab Basic Beige Transmission Distance: 8PLA PolyTerra Sunrise Orange Transmission Distance: 2PLA PolyLite Yellow Transmission Distance: 11 (most yellow colors should work, as they usually have a relatively high TD)PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #13 (1.12mm) swap to Dark BrownAt layer #16 (1.36mm) swap to BeigeAt layer #19 (1.6mm) swap to Sunrise OrangeAt layer #21 (1.76mm) swap to YellowAt layer #24 (2mm) swap to Jade White for the rest.