Matrix - hueforge

Hueforge from MatrixThe photos shows the result in 200*150mm and a nozzle of 0.4 Update :Someone asked for a more precise version, so I made a version with 0.04 layers to improve shadow management and gain a little precision, but the improvement is minimal.I started from a new 4K film capture (the 2 images aren't exactly the same), increased the contrast and carried out a few print tests, but I doubt I'll get much better, except with a 0.2 nozzleI've put the 2 versions next to each other so you can get an idea.Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionVersion 1 - Layer 0.08Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.13x2