Max Verstappen (Hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.24mm  The Max Depth is 2mm and the Actual Depth is 2.1mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Protopasta Silver Smoke Grey Transmission Distance: 20 PLA Protopasta Spittin' Seeds Gray Transmission Distance: 16 PLA Kingroon White Transmission Distance: 5.8 This print uses 4 unique filaments Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Silver Smoke Grey At layer #14 (1.2mm) swap to Spittin' Seeds Gray At layer #18 (1.52mm) swap to White for the rest.