Mazda MX5 ND Side Window Foilers

UPDATE 2 - Printed v1 and used acetone to smooth out the finished surface. Then I heated it with boiling water and bent it to curve to fit the window bar. I also sprayed it with matte black PlastiDip after curving.

UPDATE - The v2 does not print well. I am going to try printing the v1 again and heating it up to add the necessary curvature. If that works I will change this to reflect that modification.

Side window deflectors for the Mazda MX5 ND (2016-present). These items attach to the bar between the side window and the tiny triangle window (near the side mirrors) with automotive double-sided tape.

These deflectors interrupt the flow of air past the window, reducing buffeting inside the cabin when the side windows are down.

v1 is flat on the underside, and requires post-processing

v2 adds curvature to the underside to match the curvature of the window and an angle to the bottom to match the angle of the window section. Unfortunately, it is difficult to print this versi