MAZINGER Z

Project: mazinger.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130.61x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Army Blue At layer #9 (0.8mm) swap to Red At layer #21 (1.76mm) swap to Gray At layer #23 (1.92mm) swap to Lilac Purple At layer #26 (2.16mm) swap to Jade White At layer #27 (2.24mm) swap to Yellow for the rest.