Thingiverse
Mean Well 12V Mount
door NickenChoodle
2
Downloads
2
Likes
0
Makes
Bought a new power supply for my MPMD and wasn't happy with the exposed mains lines, so I designed this to hold it in place without screws and for a little airflow from bottom to top.
The power supply I made it for is the Mean Well LRS-150F-12 Power Supply and the snap in EIC mains socket, so double check your dimensions before committing!
I mounted it with hot glue and then an edge of silicon. The 4 holes are not to be used with screws, as they will either touch or come incredibly close to the back of the mains. I will not be to blame if you electrocute yourself. The holes are only intended for extra surface area for glue to stick.
Unfortunately cannot be printed on the MPMD it was designed for.
The power supply I made it for is the Mean Well LRS-150F-12 Power Supply and the snap in EIC mains socket, so double check your dimensions before committing!
I mounted it with hot glue and then an edge of silicon. The 4 holes are not to be used with screws, as they will either touch or come incredibly close to the back of the mains. I will not be to blame if you electrocute yourself. The holes are only intended for extra surface area for glue to stick.
Unfortunately cannot be printed on the MPMD it was designed for.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!