Mech Bee - Hueforge

Print settings below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.3mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Chrominal Shadow Gray Transmission Distance: 3.1 PLA Paramount 3D Stealth Gray Transmission Distance: 0.6 PLA Paramount 3D Egg Yolk Yellow Transmission Distance: 5.1 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4 PLA Jessie Premium Quarter White Transmission Distance: 4.6This print uses 6 unique filaments Swap Instructions: Start with Black At layer #8 (0.76mm) swap to Shadow Gray At layer #12 (1.08mm) swap to Stealth Gray At layer #13 (1.16mm) swap to Egg Yolk Yellow At layer #18 (1.56mm) swap to Sunflower Yellow At layer #21 (1.8mm) swap to Quarter White for the rest. Boost Me