Mecha Sonic Hueforge

Painting obtained through the Hueforge technique where it represents the figure of Sonic as a MechaI also added a frame taken from an old model of mine which matches this painting very well.you can also find the frame among the print profilesPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Blue Transmission Distance: 4 PLA PolyLite Grey Transmission Distance: 1 PLA+ Sunlu White Transmission Distance: 5 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu Red Transmission Distance: 6This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #12 (1.04mm) swap to Grey At layer #15 (1.28mm) swap to White At layer #19 (1.6mm) swap to Pure Yellow At layer #20 (1.68mm) swap to Red for th