mecha splash

by Lelus78

3 Downloads

3 Likes

0 Makes

Download Model

HUEFORGE mecha robot

Project: mecha splash.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used: PLA creality black Transmission Distance: 0.1 PLA creality grey Transmission Distance: 0.3 PLA+ esun bordo Transmission Distance: 2.7 PLA Anycubic beige Transmission Distance: 2.8This print uses 4 unique filamentsSwap Instructions: