Thingiverse
Mechanical Laser Show No-Support Version
door Codyacehardware
60
Downloads
80
Likes
0
Makes
Edit: Both X and Y Cams updated for better tolerance.
Edit2: Realized I didn't add a change to the base I had intended. Notches to allow the snap-together crank handle to move freely around.
My slicer doesn't do supports and I hate having to clean up after them anyway. So with a bit of creative re-engineering I made everything support-free friendly. One extra advantage is that the separation of the gears and cams means less printing time.
Print one of everything plus one extra Bolt.stl (I actually just used 1/4" socket head machine screws.)
On the bottom of the Cam(s) pull the extra ring of material free from around the hole.
The X and Y gears should fit into the gear-shaped holes on the bottoms of the cams. Your tolerances may vary.
Thanks to AdditiveTech for an amazing design!
Edit2: Realized I didn't add a change to the base I had intended. Notches to allow the snap-together crank handle to move freely around.
My slicer doesn't do supports and I hate having to clean up after them anyway. So with a bit of creative re-engineering I made everything support-free friendly. One extra advantage is that the separation of the gears and cams means less printing time.
Print one of everything plus one extra Bolt.stl (I actually just used 1/4" socket head machine screws.)
On the bottom of the Cam(s) pull the extra ring of material free from around the hole.
The X and Y gears should fit into the gear-shaped holes on the bottoms of the cams. Your tolerances may vary.
Thanks to AdditiveTech for an amazing design!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
