Medusa Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 141.54x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyLite White Transmission Distance: 4.9 This print uses 4 unique filaments Swap Instructions: Start with Grey At layer #8 (0.72mm) swap to Black At layer #11 (0.96mm) swap to Red Border Only Colors from here until the end. At layer #23 (1.92mm) swap to White for the rest. if you having adhesion issues, paint on mouse ears, up bed temp, or reduce fan speed.