Thingiverse
Meegopad T07
von XylenC4
2
Downloads
5
Likes
0
Makes
Custom housing for Meegopad T07 mini computer stick.
It supports a 30mm fan directly mounted over the heat sink of the CPU.
- This will reduce the CPU trolling which improves the Power.
- You will also get rid of the annoying noise of the bulk fan.
I used a 100Ω in series with a 30mm/5VDC fan connected to one of the USB-Ports
Because of the shape of the front you will need a short HDMI adapter cable. It does not fit anymore at the back of any device.
It supports a 30mm fan directly mounted over the heat sink of the CPU.
- This will reduce the CPU trolling which improves the Power.
- You will also get rid of the annoying noise of the bulk fan.
I used a 100Ω in series with a 30mm/5VDC fan connected to one of the USB-Ports
Because of the shape of the front you will need a short HDMI adapter cable. It does not fit anymore at the back of any device.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!