Mellow 3D UTOC-3 CAN controller model

Working on designing a simple case/enclosure for the recently added CANbus parts. I didn't find an existing reference model of the Mellow UTOC-3 CAN controller board, so broke out the calipers and made my own.

I did not include the handful of jumper pins on the top of the board, as all of them fall well within the outer bounds of the board, and are nowhere near as tall as the various surface mounted connector housings which are represented.

Recommend incorporating a minimum of 2.5mm of clearance below the bottom of the board to clear the pins soldered through the bottom.