Melted Skull Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 55x163.62mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.5mm and the Actual Depth is 1.6mm Filaments Used: PLA Aurapol Black Transmission Distance: 0.3 PLA Aurapol White Transmission Distance: 5 PLA Aurapol Red Transmission Distance: 4This print uses 3 unique filaments (You can also use similar colors from other manufacturers) Swap Instructions: Start with Black At layer #6 (0.56mm) swap to White At layer #11 (0.96mm) swap to Red for the rest.