Slicer Discord
Memory Media Storage – 3D-Druckmodell von Thingiverse Thingiverse
Memory Media Storage – Bild 1 Memory Media Storage – Bild 2 Memory Media Storage – Bild 3 Memory Media Storage – Bild 4 Memory Media Storage – Bild 5 Memory Media Storage – Bild 6
Gadgets

Memory Media Storage

von tomyama · Gadgets
286 Downloads
220 Likes
0 Makes
Zum Modell
It is an accessory case to put a memory card in.
You can select and stack the trays you need.

Micro SD cards and SD cards have their own trays.

All trays can be attached with a lid "Tray Lid" for taking out. A micro SD card or SD card tray and a "2001 Tray Lid" make a compact portable memory case (part numbers 2001 and 3001 or 2001 and 4001).

There are two types of holders that hold trays. Split type and integrated type. The split type prints faster. In most cases, the split type is sufficient. The split type has a small gap between them, so when placing the micro SD card tray on the bottom, it is necessary to insert "1001 Holder Support" between them.

The holder fixing hole size is M3. Since the hole diameter is 3mm, it will shrink a little when printed, and the M3 bolt cannot be inserted by hand. Screw in using a screwdriver. I like this method because it installs without nuts.

I think that the M3 bolt that is easy to obtain is about 40mm.
The holder has 6 fixing hol
Kategorie
Gadgets
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen