Thingiverse
MendelMax adjustable Z axis end stop
door CaptainObvious
79
Downloads
49
Likes
5
Makes
The end stop for the Z axis that came with my MendelMax is only adjustable by sliding it up and down the 8mm rod, not very practical, so I made one that can be tuned by turning a wheel.
It uses two M3 x 8mm socket head screws for the clamp and a 20mm to adjust the height. The spring is optional.
The wheel screw needs to be fixed in place with glue so it won't slip.
I included the DesignSpark Mechanical file so anyone can modify it if they wish to.
The M3 screw has a 0.5mm thread, the adjustment wheel has 10 gradations, so each step moves the end stop by 0.05mm
It uses two M3 x 8mm socket head screws for the clamp and a 20mm to adjust the height. The spring is optional.
The wheel screw needs to be fixed in place with glue so it won't slip.
I included the DesignSpark Mechanical file so anyone can modify it if they wish to.
The M3 screw has a 0.5mm thread, the adjustment wheel has 10 gradations, so each step moves the end stop by 0.05mm
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!