Meowth

Meowth is part of my Pokemon Collection found →here← on Makerworld.Also check out my Patreon for more designs (including Bulbasaur, Dragonite, Charizard, and my Pokemon Moon series) Project: MeowthPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.5mm and the Actual Depth is 2.5mm This print uses 7 unique filamentsPLA BambuLab Basic Black PLA BambuLab Basic Green PLA BambuLab Matte Dark ChocolatePLA BambuLab Matte Scarlet Red PLA BambuLab Matte Ivory White PLA BambuLab Basic Yellow PLA BambuLab Matte Sky Blue Swap Instructions:Start with BlackAt 0.72mm swap to GreenAt 0.96mm swap to (Brown) Dark ChocolateAt 1.12mm swap to Scarlet RedAt 1.36mm swap to Ivory WhiteAt 1.52mm swap to YellowAt 1.92mm swap to Ivory WhiteAt 2.24mm swap to Sky Blue for the rest.