Mercury

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmI made two version size .stl files and print settigns, the first is 200x200 and the second 150x150mm. The color change settings are identical.You may print at higher layer heights below the Base Thickness of 0.56mm.The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.02mm.Filaments Used:PLA ******** Black Transmission Distance: 0.3PLA Sunlu Meta Grey Transmission Distance: 3.5PLA ****** + Gray Transmission Distance: 3PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to GreyAt layer #10 (0.88mm) swap to GrayAt layer #14 (1.2mm) swap to Jade White for the rest.