Mesh-detect case

This is a case for the Mesh-detect device that was created by Colonel Panic, the case allows for 2 externally mounted SMA antennas, and the use of a battery while protecting the mesh-detect and still having access to the USB ports, LEDs, and Screen. Mesh-detect: https://github.com/colonelpanichacks/mesh-detect Created by: Colonel Panic Printed in Purple and White PLA as well as Translucent PETG for the LED indicator on Bambu A1 using a .4mm nozzle. Build steps:1. Press fit in 4 M3 hex nuts into the backside of the case in the designated spaces. 2. Attach external antenna to the back housing. run the cables out the USB ports for now. 3. If you are using a battery it would go in next, you will need to attach it to the back of the board and place the batter in the case. 4. Place the board in the case, with the seeed usb port going in first, being mindful of the antenna cables. place the board in. 5. feed the antenna wires back in over the board (see last image) and then plug in antenna to