Mesh Map Pocket Frame

I've been building a flight simulator at home, and I needed a good place to stick my aeronautical charts, pilot's handbook, Android tablet, etc. This is a mesh map pocket frame that can be mounted on any flat surface, so you can store all your goodies in your car, boat, plane, what-have-you.

There's one .stl for the whole frame if you have a big enough printer. Otherwise you can use the three split pieces and join them with the dovetail joint. The tolerances are tight, so a little sanding will be necessary.

###Get these things:

- 5 ft spool of 1/16" diameter bungee cord ([eBay](http://r.ebay.com/WrE0M4))

- 5x M3 flat-style head machine screws/nuts or 4-gauge wood screws @ whatever length you need

###Do these things:

1. Print at around 0.15-0.25 mm layer height, with at least 50% infill (100% is better only because it's easier to sand if the fit is really tight). No rafts, and use supports if you're using the three-piece version for the dovetail joints.

2. Loop