Meshtastic Heltec V3 Case

This is a case for a Heltec V3 Meshtastic board. It uses a single 18650 cell for power and runs for 7-10 hours on a charge. FYI the front panel will need to be glued on because to keep it small, there is nowhere to put screws. This design is not perfect and you may need to make some slight modifications to make it work but you should be able to confidently print it and have everything fit.

The button switch is a standard 12mm latching button switch, these are available on amazon for very cheap.

https://www.amazon.com/STARELO-Latching-pre-Wiring-Waterproof-Aluminum/dp/B0CNLNTN5J/ref=sr_1_13?crid=30ONL778V5Z9Y&dib=eyJ2IjoiMSJ9.vl6dyO_GEIWHQwbOnhqt8AOn9id8A_EFKX0Us1dDXx_Mplj0EgYs2HNibKrJ_5WogwW5_qMASPEFBG7QAH-y2TtALf1_n0TrSUMyn5bITbd65fR7qlX3C3_Y66JPPFsVDlT07r6-QaCFaix_baI3e1gl2CwAOgAHs23d-vYtr3QcW2-VW2nblfWHIDFy8p2FEKuBlOls4wDYt_SCBz3xtMMUx94Y-bpdPEOwd0oqY7Y.FcoacvHbalCcaQBtxx50gsDepnf_zV_msyOdwAIXVE0&dib_tag=se&keywords=10mm%2Blatching%2Bswitch&qid=1752094160&sprefix=10mm%2Blatching%2