Metal Gear Solid - Gray Fox Hueforge

Project: Gray Fox Metal Gear.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 169.69x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Elegoo Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #10 (0.88mm) swap to Jade White At layer #13 (1.12mm) swap to Red At layer #17 (1.44mm) swap to Orange At layer #18 (1.52mm) swap to Jade White for the rest. Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo How to print more than 4 colours with a single AMS: from 42 sec onwards in the video