Metric nut M8 / Mutter M8

Just a simple nut in metric dimensions.
DIN EN ISO 4032 / DIN 934

I recommand to use the following printing settings to ensure that the nut fitts like it should. Specialy the disabled print cooling is important if you want to use ABS.

-Layer height: 0.1
-Infill density: 100%
-Material: ABS
-Printing temperature: 240°C
-Build plate temperature: 100°C
-disable Print cooling


The nut has a slight chamfer. Nevertheless it could be printed without any special "Build Plate Adhesion Type". I used "Skirt" as Type. Important, as always in terms of ABS, is that you have a sticky build plate. I simply used a glas plate with glue stick.