metroid HueForge

Hice este trabajo con hueforge y anycubic kobra s1 Project: a.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.08mm and the Actual Thickness is 1.92mm #080a0d PLA PolyLite Black Transmission Distance: 0.7 #0251a7 PLA Jessie Premium Bold Blue Transmission Distance: 2.6 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 2.5 #f66a20 PLA Jessie Premium Safety Orange Transmission Distance: 2.7 #b32828 PLA Prusament Lipstick Red Transmission Distance: 2 #efefea PLA Jessie Premium White Transmission Distance: 2.9This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Bold Blue At layer #8 (0.72mm) swap to Sky Blue At layer #12 (1.04mm) swap to Safety Orange At layer #14 (1.2mm) swap to Lipstick Red At layer #20 (1.68mm) swap to White for the rest.