Mewtwo Hueforge

Project: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.6x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.3mm and the Actual Depth is 2.2mm Filaments Used: PLA Paramount 3D Black Transmission Distance: 4 PLA PolyLite Purple Transmission Distance: 0.5 PLA PolyLite Pro Pink Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Purple At layer #12 (1.04mm) swap to Pink At layer #17 (1.44mm) swap to Jade White for the rest.