Mewtwo Hueforge

DO NOT CHANGE THE Z-HEIGHT. For ease of use, i suggest unchecking the “UNIFORM SCALE” and change X and Y Percentace only when editing size; Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Matte Ash Gray Transmission Distance: 1.5PLA BambuLab Matte Ivory White Transmission Distance: 3.5PLA BambuLab Matte Lilac Purple Transmission Distance: 2This print uses 4 unique filamentsSwap Instructions:Start with CharcoalAt layer #10 (0.88mm) swap to Ash GrayAt layer #12 (1.04mm) swap to Ivory WhiteAt layer #20 (1.68mm) swap to CharcoalAt layer #24 (2mm) swap to Lilac Purple for the rest.