Mewtwo_hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4Swap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to Scarlet Red At layer #18 (1.52mm) swap to Lilac Purple At layer #25 (2.08mm) swap to Lemon Yellow for the rest.