Slicer Discord
MFT table template – 3D printable model from MakerWorld MakerWorld
Machine Tools

MFT table template

9 Downloads
1 Likes
0 Makes
Go to Model
Build your own bench dog ready MFT table with jigsaw templates.Print as many of the templates you need (maybe a full table) or a few and fix them with screws (3.5x25 posidrive) and move the other individual plates. The hole is 30.1 mm, it should fix a router with 30mm guiding / copy insert.Print with seams painted on the round corners (seams can add a little filament, on the rounded corners it doesn't matter) and max walls and/or 100% infill. The 30.1 mm hole always has a seam, remove it if necessary with sand paper, file or dremel.The individual tiles should fit very tight. That's by design, I used a dremel and fine file to smooth the inside of the jigsaw holes so it fits smoothly.Dimensional accuracy is a little hit and miss depending on the filament. My tiles print 95.8 95.9 square that should compensate for the small gap in the jigsaw puzzle.
mft
Category
Machine Tools
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
significant post-processing
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
PLA
Post-processing
Sanding, Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

repiuk also publishes on

23 additional models across 1 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection