Miata NC ECU relocation bracket

This is a prototype for a relocation bracket for ECU of the NC Miata based on TDR super cool kit. A couples of notes about this design: - only works if your intake has a bend to accommodate the ECU connectors, look up TDR kit to see what I mean. - will have to be printed in ASA or better. - reuse the factory ECU bracket to attach it securely to relocation bracket. - ground strap bolts directly with the bracket into the frame - NEEDS TO BE FIXED -. The easiest way would be use a nut insert in the plastic between the car frame and the top of the nut and a washer to hold the plastic in place. Finally run a wire between the ground strap and the ECU frame. - currently the mounting holes are wider to allow fitment variations, final design will most likely use inserts or a nut. - I will provision two mounting tab for the cable zip tie running between the battery and fuse box. no holes to relocate the power steering reservoir nor air deflector to cool the ECU, I really can’t see why that would be required. Note: The Fusion projet is a bit of mess but it was my first attempt at CAD in a very long time.