Mic stand + Spider

I made a microphone stand with spider that is cool looking and works very well :)



There is 4 options for the spider :
-cut in half (easier to print) with holes for metal nail (much stronger)
-cut in half (easier to print) without holes
-in one piece with holes for metal nail (much stronger)
-in one piece without holes

And 2 options for the mic ring :
-Universal 46mm-53mm (50mm inner diameter) ( tested with the BIRD UM1)
-Fifine k670 or k669 (print it at 95% scale)
You can change the ring scale in your slicer to fit your mic.


You will also need :
1 x m4 screw (m4*18 or 20) with a nut and a washer.
1 x zip tie for the mic ring (or 3 or 4 small rubber bands will also work)
3 x m3 screw for plastic (or glue if you want)
5 x small size rubber band
10 x small nail if you chose spider with holes
- some glue or super glue
- a thin fabric for the pop filter
- a flat file or a dremel to flatten 2 side of the m4 screw if you want to put the screw knob

PLA or PETG