Michael Jordan HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.6mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smatfil rojo Transmission Distance: 2.3 PLA smatfil White Transmission Distance: 6This print uses 3 unique filamentsSwap Instructions: Start with negro At layer #6 (0.48mm) swap to rojo At layer #8 (0.64mm) swap to White for the rest.