Michael Myers

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 138.38x246mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #e2dedb PLA PolyLite White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to Pumpkin Orange At layer #20 (1.68mm) swap to White for the rest.