Mickey Mantle HueForge

Mickey Mantle Hue Forge design. For the 3mf I uploaded use the following settings:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 187.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #11 (0.96mm) swap to Blue Gray At layer #15 (1.28mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest.