Mickey Mouse & Minnie

Do NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you! Framework is here: https://makerworld.com/en/models/372009#profileId-271950 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.1 PLA BambuLab Matte Marine Blue Transmission Distance: 0.1 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Matte Ice Blue Transmission Distance: 1.9 PLA BambuLab Matte Latte Brown Transmission Distance: 0.6