Slicer Discord
Micro Mesh pad storage/drying stand – 3D-printbaar model van MakerWorld MakerWorld
Other Tools

Micro Mesh pad storage/drying stand

38 Downloads
12 Likes
18 Makes
Model downloaden
As an avid wood turner, I regularly use micro mesh pads in the finishing process to remove the scratches that remain after conventional sanding. Micro Mesh pads are used wet and one of the challenges I found myself dealing with was trying to keep them in the right order and somehow in a position that allowed them to dry after use. The first solution I introduced was my wet sanding station that coupled a storage area for the pads with a water reservoir to keep them wet and remove the slurry generated during sanding. While many liked the design, there were some that wanted to separate the water reservoir and the pad holder. This was my answer to address that need. The unit is designed with each of the micro mesh pads having their own cell to call home. Each cell has a floor that is angled towards the center which is open to an area below. This allows the water on the pads after wet sanding to drain away from the pads. To keep dust in your shop away from the pads while not in use, the hol
Categorie
Other Tools
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Wood PLA
Nabewerking
Schuren
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

2 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie