Micro Pistol Crossbow (Reverse Compound)

Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm H:3mm string (I used a kevlar line from a paraglider) Print Settings: Pully_Big: PLA 0.2mm/ 100% Infill / 2x Pully_small: PLA 0.2mm/ 100% Infill / 2x Cockinghandle: PLA 0.2mm/ 100% Infill cockingsled: PLA 0.2mm/ 100% Infill handle_left: PLA 0.2mm/ 25% Infill handle_right: PLA 0.2mm/ 25% Infill trigger: PETG 0.2mm/ 100% Infill limb_right: PETG 0.2mm/ 100% Infill limb_left: PETG 0.2mm/ 100% Infill handle_body_right: PLA 0.2mm/ 25% Infill handle_body_left: PLA 0.2mm/ 25% Infill trigger_roll: PLA 0.2mm/ 100% Infill mainbody: PLA 0.2mm/ 25% Infill boltholder: PETG 0.2mm/ 100% Infill cocking_bracket: PLA 0.2mm/ 25% Infill magneticbolt: PLA 0.2mm/ 100% Infill /supports on Post Printing: cut all the 2mm wire to the desired length you will need: - 2x 20mm (for the