Thingiverse
Micro SD Card Extension Mount
par uzi6574
52
Téléchargements
26
Likes
0
Makes
A Mount for a MicroSD Card Extension on a 20mm Rail
there is a 2mm hole on the bottom that i drilled then to 2.5mm and used a 3mm Screw to fixate the Housing of the Extension. Just drill the Hole to whatever Screw you got handy.
The holes for the mounting Screws with T Nuts are for M4 or M5 Screws. (different stl files)
can be printed without any support
there is a 2mm hole on the bottom that i drilled then to 2.5mm and used a 3mm Screw to fixate the Housing of the Extension. Just drill the Hole to whatever Screw you got handy.
The holes for the mounting Screws with T Nuts are for M4 or M5 Screws. (different stl files)
can be printed without any support
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !