Thingiverse

MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE – Bild 1

MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE – Bild 2

MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE – Bild 3

MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE – Bild 4

MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE – Bild 5

Robotics

MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE

by Playgateway · Robotics

61 Downloads

50 Likes

1 Makes

Go to Model

Convert your SG90 micro servo to a micro robot servo! This easy print consists of only 3 parts and gets your small servos ready for a full size robot. The pieces are easy to assemble (see video) and easy to stack into your own needed configuration.

9g servo microservo micro servo Micro Servo Arm robotics robot arm servo holder Servo Mount servo sg90 sg90 towerpro

Category

Robotics

Source

Thingiverse

Published

25.04.2017

What you need to print this: Intermediate Medium confidence

Why?

no supports · 3-part assembly · very large print

Support-free May need scaling or splitting

Supports 0/3

Assembly 1/3

Settings 1/3

Bed size 3/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

300 mm (Extra large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE?

Any FDM printer should handle MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE need supports when printing?

No supports needed for MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE — it's designed to print clean off the bed.

What file format is MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE available in?

MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE free to download?

Yes, MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

MICRO SERVO TO ROBOT SERVO - SIMPLE AND STACKABLE

Similar Models

Add to Collection