Slicer Discord
MICROLAB 2x LAN/ETHERNET CABLE GUIDE – 3D-Druckmodell von MakerWorld MakerWorld
Electronics

MICROLAB 2x LAN/ETHERNET CABLE GUIDE

25 Downloads
8 Likes
14 Makes
Zum Modell
I didn't like the cables running through, around or under the microlab, and then realised i hadn't used all the threaded holes around the side. So here it is, a cable organiser to guide (in my case) 2 ethernet cables around the side of the microlab in an organised fasion. I used M3x30mm socket head screws I had on-hand, however you can probably get away with shorter :) Have fun!
Kategorie
Electronics
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

008 LAB veröffentlicht auch auf

16 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

1 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen