Micromake C1 LCD Panel

New LCD Plate for the Micromake C1. The sliced model pictures come from Craftware 1.14 beta. The model comes with a basic top, but your slicer holds the key to nearly any pattern. First, unlock the uniform scaling and set the Z-Axis to 6mm. Then select the infill type, pattern, and percentage, but make sure that the walls themselves are a bit thicker. Then print 2/3 of the way through o get your pattern. If don't want a deep pattern, you can set the bottom layers to just under 3mm. The lines/spaces underneath the large rectangular hole are reference points for a progress bar.