Micromake D1 Detachable Effector

I created this because I want to get a laser and I would like to attach other items to my Delta printer.

Delta push rod arm separation spacing = 42mm
Hot End = E3D V5 , (I am not sure if it will fit the V6 "Probably Not").

I am currently testing it on my Micromake D1 and it is working really well for me.
I have made some changes after my print and this is still untested but should improve the overall design.

There is no Offset on the parts so you will have to clean it up to fit. I prefer it this way it makes for a solid part when assembled.

All the holes can be tapped or enlarged that will be up to you.

You only need some M3 Nuts and Bolts long and short.

For the AirDirectAddon you will need some 15mm M3 bolts with small heads so it does not hit the bed when printing.

I printed the MainBase upside down with only a little support structure from the bed.

Changing my stock effector to this did not improve my print quality.
I found that lowering Jurk and Accel