Microphone cache, two other versions.

A friend showed me the model « Oktava MK-012 microphone blimp ».
It is good, but only suitable for one model of microphone.
At his request, I modeled two versions, adaptable to different microphones.
I posted here the FreeCAD and stl files of the two versions I modeled.

The adapters can be used on both versions of microphone cover.
For a different diameter, just take one of the two FreeCAD files and modify the inner diameter of one of the adapters. The outer diameter should remain the same.
The outer diameter varies along the tube, to easily fit into the base of the microphone cover, and to wedge when putting it on.
It is possible to put on the microphone with its adapter from both sides, as desired. In my opinion, it is easier to put it on from the "bottom".

I printed everything:
° without support
° with a layer height of 0.2 mm
° with a number of perimeters of 6, so the infill does not matter, which will be 100%
° Adding a skirt during printing to stabilize it is recomme