Microscope stand

Easy to print stand for cheap chinese microscope with xy-cross table.
No supports required.

https://www.amazon.de/gp/product/B07DVFBVPF/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

You will need 2 smaler woodscrews to fix the device holder and the bar and 4 wood screws for the base.
For the cross table i used two threaded rods and 6 nuts M5 .

Print both knobs and the smaler gear 2 times and the pin 4 times. The pins are for fixing the two pieces of the cross table for supportless printing.

For the cross table knobs i used two thread inserts M5. This is the reason why the holes in these knobs are 7mm. If desired, I will add a version with a 5mm hole.