Slicer Discord
Mid-Century Tray – 3D-Druckmodell von MakerWorld MakerWorld
Decor

Mid-Century Tray

120 Downloads
213 Likes
80 Makes
Zum Modell
This tray is designed to seamlessly mix into your mid-century home decor.The slight curve of the tray's inner surface causes layer lines to be extremely visible. Instead of trying to hide them, I decided to utilize them as part of the design. Looking for more Mid-Century/Retro designs? Find them here. Print SettingsBecause the design in the middle of the tray is meant to blend into the layer lines of the curved sides, a 0.2mm layer height is required. Handles must be printed as oriented (on their sides). This will add strength that is needed during assembly.Print 2 handles. Assembly InstructionsDuring assembly, don't be afraid to use force! The handles were designed to be a tight fit so they can be functional without the risk of pulling out. You will need to press firmly to install them.Align a handle with the holes on one side of the tray. Press one side into the hole until the tabs flex and they slightly penetrate the opening. Repeat with the other side of the handle. Once bo
Kategorie
Decor
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Warum?
0.20mm Schichten
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
ABS
Schichthöhe
0.2 mm
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

JamesThePrinter veröffentlicht auch auf

48 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen