Mighty Micro Switch

- I might possibly have left default settings and posted everything in inches. Units are intended to be mm and can be directly scaled. If you import and its much larger than expected that's why. -Final iteration in separate folder, added value I left in several other parts variations designed along the way. - Diaphragm activated momentary switch, normally open and normally closed options. Y - Design enables efficient automation process and eliminate manual assembly with minimal changeover to alternate configurations. Y - Differential, vacuum and positive pressure options. Y - Electrical Connection options: Male quick connect (4,7 X 0,5 mm) Y - Automated calibration enabled to adjust pressure set point at testing. Y - Ports interface for 8mm flexible tubing diameter maximum. Y - Pressure ranges: 15 to 40 Pa (low) and 30 to 160 Pa (high). Theoretically Y - Maximum body size envelope: 25 X 25 X 7mm. - Preferred body size envelope: 14 X 14 X 7mm. Main body is within 14x14x7 mm volume. All other parts withing 25x25x7mm. (except 8mm air nozzle) - Highlights core manufacturing technologies (injection molding, stamping, assembly, tooling, machining, insert molding, and automation). With a bonus of heat-staking. - Utilizes accelerating manufacturing technologies and materials. Y - Cost effective design with least amount of materials. Y Development of a diaphragm operated vacuum/pressure micro-switch. Switch allows setting sensitivity and normally open or closed operation for either vacuum or pressure via adjustment screws. Diaphragm is made of "Metal Rubber" elastomer that has been doped to be conductive. (https://en.wikipedia.org/wiki/Metal_rubber) Which can have a resistance a low as 1/10 of an ohm. The common quick connect makes direct contact with the rim of this diaphragm. Reduced parts count to 6 unique components (8 physical) two of which are screws down from 13 shown in drawing. Eliminated rivets in favor of heat stake fastening all components including what i assume